AVK GATE VALVE, FLANGED, PN10/16

Face/face EN558/3 (BS), EN1092 flange, ductile iron, SS stem, A2 bolts, blue EP to GSK, EPDM

Contact

AVK Philippines Inc.

#70 West Avenue, Brgy. West Triangle 1104 Quezon City Metro Manila, PH

Flanged gate valve for drinking water, treated waste water free of solids and fibrous impurities and other neutral fluids. Maximum operating temperature 70°C.

AVK gate valves are designed with built-in safety in every detail. The wedge is fully vulcanized with AVK's own drinking water approved EPDM rubber compound. It features an outstanding durability due to the ability of the rubber to regain its original shape, the double bonding vulcanization process and the sturdy wedge design. The triple safety stem sealing system, the high strength stem and the thorough corrosion protection safeguard the unmatched reliability.

Variant 02/20-021
Connection: Flanged
Material: Ductile iron
DN: DN50 - DN400
PN: PN 16
Closing direction: Clockwise to Close

Features

  • Wedge nut in dezincification resistant brass, designed as a fixed, integral part of the wedge which prevents vibration and ensures durability
  • Wedge and wedge nut fully vulcanized with drinking water approved EPDM rubber
  • Wedge shoes in PA and guide rails on the body make the wedge slide easily up and down, keeping operational torque low even with high differential pressure
  • A large conical stemhole going all the way through the wedge ensures circulation and prevents stagnant water
  • Stainless steel stem with wedge stop and rolled threads for high strength
  • Full circle thrust collar keeps the stem firmly lined up and ensures low operating torque
  • Triple safety stem seal with a wiper ring outermost to protect against contamination from outside, in the middle four O-rings around the radial bearing and innermost a lip seal as main seal to the system pressure
  • Bonnet gasket with a circular cross-section and fixed in a recess to avoid blow-out
  • Counterbored, stainless steel A2 bonnet bolts, sealed with hot-melt and encircled by the bonnet gasket for optimum corrosion protection
  • Full bore
  • Fusion bonded epoxy coating to GSK and DIN 3476

Downloads

Datasheet
Appendix
Certificate(s)
Outline drawings DWG
Outline drawings DXF
Outline drawings IGS
Outline drawings STEP

Reference nos. and dimensions:

Scroll for more info
AVK ref. no. DN
mm
Flange
drilling
L
mm
H
mm
H3
mm
F
mm
F1
mm
F2
mm
W
mm
Theoretical
weight/kg
02-050-20-014649 50 PN10/16 178 208 290 14 17 29 165 9.0
02-065-20-014649 65 PN10/16 190 245 337 17 20 34 185 11
02-080-20-014649 80 PN10/16 203 282 382 17 20 34 200 15
02-100-20-014649 100 PN10/16 229 305 415 19 22 34 220 17
02-125-20-014649 125 PN10/16 254 346 471 19 22 34 250 23
02-150-20-014649 150 PN10/16 267 401 543 19 22 34 285 32
02-200-20-004649 200 PN10 292 490 660 24 27 34 340 44
02-200-20-014649 200 PN16 292 490 660 24 27 34 340 44
02-250-20-004649 250 PN10 330 625 825 27 31 47 400 70
02-250-20-014649 250 PN16 330 625 825 27 31 47 400 70
02-300-20-004647 300 PN10 356 707 934 27 31 47 455 96
02-300-20-014647 300 PN16 356 707 934 27 31 47 455 96
02-350-20-004647 350 PN10 381 924 1177 32 37 55 564 182
02-350-20-014647 350 PN16 381 924 1191 32 37 55 564 214
02-400-20-004647 400 PN10 406 951 1234 32 37 55 565 192
02-400-20-014647 400 PN16 406 951 1241 32 37 55 580 221
Enquiry
Scroll for more info

Components

1. Stem Stainless steel 1.4104/1.4021
2. Wiper ring NBR rubber
3. O-ring NBR rubber
4. O-ring NBR rubber
5. Bushing Polyamide
6. Bonnet Ductile iron GJS-500-7 (GGG-50)
7. Thrust collar Brass DZR CW602N (CZ132)
8. Manchette EPDM rubber
9. Stop ring Stainless steel
10. Bonnet bolt Stainless steel A2
11. Bonnet gasket EPDM rubber
12. Wedge nut Brass DZR CW626N
13. Wedge core Ductile iron GJS-500-7 (GGG-50)
14. Wedge rubber EPDM rubber
15. Body Ductile iron GJS-500-7 (GGG-50)
16. Circlip ring Stainless steel

Test/Approvals

  • Seat: 1.1 x PN (in bar), Body: 1.5 x PN (in bar). Operation torque test
  • Approved according to ACS-France

Standards

  • EN 1074 part 1 & 2
  • Face-to-face dimension according to EN 558, Series 3
  • Flange drilling to EN1092, PN10/16
0 Files In the package